Hotpoint UH6F1CW1, Instructions For Use Manual

7

*Available on selected models only. Please check on the QUICK START GUIDE if this function is actually available on your model.

2.9. FREEZE CONTROL*

Freeze Control is an advanced technology that 

reduces temperature fluctuations in the whole freezer 

compartment to minimum, thanks to an innovative air 

system, totally independent from the fridge. Freeze burns 

are significantly reduced  and food preserves its original 

quality and color.

To activate the Freeze Control choose the function from 

the menu, set to >ON< and press OK button to confirm 

the selection. To deactivate this function repeat the 

same procedure setting to >OFF<.

The function works properly in a defined range of 

temperature: between -22°C and -24°C.

When the function is engaged and the current 

temperature in the freezer is set to the warmer set point 

than -22°C, the temperature is automatically set to -22°C 

to match the working range.

If the function is engaged and the user modify the 

freezer temperature out of the working range, the 

function is automatically switched off.

In case of Fast freezing is engaged, the function “Freeze 

control” is inhibited until the Fast Freezing function 

switched off.

2.10. AUTOMATIC NO FROST

This product is designed to defrost automatically 

according to conditions of use and ambient humidity.

No Frost

 freezers provide chilled air circulation around 

the storage areas and prevent the formation of ice, 

thereby completely eliminating the need for defrosting.

Frozen items don’t stick to the walls, labeling stays legible 

and storage space remains neat and clear. 

In combination with ProFreeze, not only does it control the 

sensor, but directs the cooling power exactly where it is 

needed, optimizing energy efficiency.

2.11. ICE MATE*

HOW TO MAKE ICE CUBES

You can remove the ice cube tray by pulling it towards 

you.

WARNING:

 fill with potable water only (maximum level 

= 2/3 of the overall capacity).

 or 

Place again the Ice Mate in freezer compartment, or 

reinsert the ice cube tray within the Ice Mate. Take care 

not to spill water.

Wait until the ice cubes are formed (it is recommended 

to wait for about 4 hours).

NOTE:

 Ice Mate is removable. It can be placed 

in horizontal position anywhere in the freezer 

compartment or taken out of the appliance when ice-

making is not required.