Here you can set a time period of up to 23 hours 59 minutes, that will count
down. When it reaches zero, the timer will emit an audible tone.
For Example:
If you set 20 minutes, the audible tone will occur 20 minutes later.
Cook Period is the actual length of time for which, the timer will switch the
oven(s) on as part of an “Auto Cooking” programme.
(e.g. If you set 2 hours, the food will be cooked for 2 hours).
The time of day at which you want an “Auto Cooking” programme to end.
For Example:
If you set a “Cook Period” for 2 hours, and “End Time” of 11:00.
The timer will switch the oven(s) on at 9:00 and turn the oven(s) off at 11:00.
You will hear an audible tone at 11:00, to indicate that the Auto Cooking
Programme has finished.
Notes:
-
When setting an Auto Cooking programme you will need to set the oven
control(s) to the required temperature(s) when you set the timer.
-
If an Auto Cooking programme has been set the oven(s) will only operate
during the pre-programmed time.
Needs to be pressed to cancel an Auto Cooking programme and return the
oven(s) to Manual operation.
Used to adjust the various timer function settings.
Minute Minder
Button
Cook Period
Button
End Time Button
Manual Button
“+/–” Buttons
TIMER FUNCTION BUTTONS
AUTO COOKING PROGRAMME
Know Your Timer
9
CLOCKFACE
The timer incorporates a 24 hour clock.
Ensure the correct time of day is always set, before using your cooker.
SYMBOLS
A ‘bell’ symbol will light up when you select a Minute Minder Period and will
remain lit for the period set.
At the end of the Minute Minder Period, the timer will emit an audible tone
and the ‘bell’ symbol will disappear.
The ‘cookpot’ symbol will light up either:–
–
When the timer is in manual mode, or
–
During the actual Cook Period.
‘AUTO’ will light up:–
–
When the timer is first turned on it will flash. It will go out when a time
of day is set or when the timer is set to manual.
The ‘AUTO’ symbol will flash at the end of an Auto Cooking programme to
indicate that the programme has finished.
(When the ‘AUTO’ symbol is flashing, to return the oven to Manual
operation, turn the oven controls off, ensure that the correct time of day
is set, and press the “Manual” button – The ‘AUTO’ symbol will go out).
