How tome the
Bleach Dispenser
●
Use this dispenser with liquid
bleach only. If you prefer to use
powdered bleach, pour it into the
wash basket along with your
detergent. Do not put powdered
bleach into the bleach dispenser.
●
Measure bleach carefully. Here
are some recommended amounts:
FULL WATER LEVEL—1%
(310
liquid
LOW WATER LEVEL—2/3
(170 ml) liquid
●
Pour measured amount of liquid
bleach directly into bleach dispenser.
●
not overfill or allow dispenser
to overflow.
Avoid splashing.
Undiluted bleach can cause fabric
damage.
●
Never pour undiluted liquid
bleach directly onto clothes or
into the wash basket.
tome the
Softener
How to Use the
Soak setting
●
Position the Fabric Softener
Dispenser on the agitator.
Pour manufacturer’s recommended
amount of fabric
into a
standard measuring cup.
●
Add enough water to fill the cup
1/2 full.
●
Pour the diluted softener into the
dispenser.
●
The fabric softener will
automatically be dispensed at the
proper time.
●
Do not stop the washer during
the first spin.
This will cause the
dispenser to empty too soon.
●
Do not use the Fabric Softener
Dispenser with the Soak Setting.
.
setting temperature
will automatically be cold.
●
If a hot or warm soak is desired,
set the
TEMPERATURE switch to
“HOT/COLD” or “WARM/COLD”
and turn the Cycle Selector Knob to
“Heavy
Start the washer.
After washer fills and begins to
agitate, push in the Cycle Selector
Knob and turn to
Pull out
the Cycle Selector Knob to
complete the cycle.
For an extended soak
allow the
washer to fill and agitate for a few
minutes to dissolve the soaking
agent. Then push in the Cycle
Selector Knob to stop the washer
(keep lid closed) and allow to soak
for as long as desired. After
desired soak period, pull out the
Cycle Selector Knob to complete
the cycle.
8
