FOOT WARMER XLP ONE
41
Positioning Battery Pack XLP ONE
DO NOT slide Docking Station XLP over slippery material such as ski boot plastic
as the easier it slides on, the easier it will slide off. The limited warranty does not
cover loss of product due to improper attachment. (Fig. 18)
2)
Velcro
®
Attachment Straps XLP (Option) (Fig. 19)
Secure Battery Pack XLP ONE into elastic O-rings of Velcro® Attachment Strap XLP and
position Velcro® Attachment Strap XLP around leg at boot top or above calf just below knee.
3)
Extension Cords XLP 120 cm (Option) (Fig. 20)
Position Extension Cord XLP 120 cm underneath pant leg and attach Battery Pack XLP ONE
at waist or chest height.
5 Positioning Battery Pack XLP ONE
(ski & snowboard boots
)
1)
Positioning Battery Pack XLP ONE HIGH on back of boot permits pant leg to cover Battery
Pack XLP ONE but increases potential chair lift damage. (Fig. 15)
2)
Positioning Battery Pack XLP ONE on FRONT of boot permits pant leg to cover Battery Pack,
eliminates potential chair lift and stair damage, and is convenient when adjusting Setting.
(Fig. 16)
3)
Positioning Battery Pack ONE on LATERAL SIDE of boot permits pant leg to cover Battery
Pack, eliminates potential chair lift and stair damage, and is convenient when adjusting
Setting. (Fig. 17)
6 Installing Heating Elements XLP
6.1 Installing Heating Elements XLP in Hotronic‘s Heat Ready Insoles
See Figs 33 through 38 for instructions on installing Heating Elements XLP in
Hotronic's Heat Ready Insoles!
IMPORTANT NOTE:
1)
Do not cut Power Cord.
2)
Do not cut Heating Element located inside Heating Element door.
3)
Place orange fabric, heated side of Insole up when installing in footwear.
6.1.1 Trimming Hotronic's Heat Ready Insoles to size
If using Hotronic’s ONE SIZE FITS ALL INSOLES in footwear with removable insoles:
1)
Align tips of both insoles.
2)
Trace removable insole on backside of Hotronic Insole around sides and heel.
3)
Trim Hotronic Insole to size of removable insole.
4)
Hotronic Insole may be placed on top of removable insole or in place of.
Summary of Contents for XLP ONE
Page 1: ......
Page 2: ......
Page 108: ...108 FOOT WARMER XLP ONE a Fig 42 43 4 Fig 44 45 5 Fig 46 7 1 Hotronic 2 1 3...
Page 110: ......
