SET TEMP F 330
SET TEMP F 33A
1 2 3
4 5 6
7 8 9
C 0 E #
0
F
0
C
1 2 3
4 5 6
7 8 9
C 0 E #
0
F
0
C
1 2 3
4 5 6
7 8 9
C 0 E #
0
F
0
C
S E R V I C E H O T L I N E : 8 0 0 . 7 2 7 . 8 5 2 0 H O T R O N I X . C O M
HOTRONIX
®
AIR SWINGER
IMPORTANT:
The Actual Pressure must be re-checked each time a pressure change is desired.
Press the Temperature
Key (Press for 2 seconds).
The “Ready to Print”
message will stop blinking.
Press the Temperature Key a second time.
(Press for 2 seconds)
This signals the controller that you are about to store the settings
that you are currently using. The controller is now ready to accept
the next command.
Press the “C” Key (Press for two seconds).
Press the Number Key (0-9) that you desire to assign your new
stored program. Once the new program is stored into memory, your
press will return to the “READY TO PRINT” mode.
REMEMBER:
Keep a written record of your new preset programs as well as notes on the best temperature,
time, and pressure for each garment type and applications.
PAGE 16
Storing Settings - cont.
