S E R V I C E H O T L I N E : 8 0 0 . 7 2 7 . 8 5 2 0 H O T R O N I X . C O M
HOTRONIX
®
AIR SWINGER
HOTRONIX
®
AIR SWINGER
ADJUST DUAL TIME
Dual Time will allow you to enter two times which will alternate between print cycles.
Press the Time Key.
(Hold for two seconds)
Key in desired time. To enter time, key in 3 digits within a range of
001 to 999 seconds (i.e. 008 seconds). To accept time withought
changing it, press the “E” Key and begin entering second time.
NOTE:
The press will not accept times below 001 or above 999
seconds. If you mistakenly attempt to key in a time beyond the
allowable range, the press will beep to alert you of your error.
Press “E” Enter Key to enter the time (press for 2 seconds).
Your time has now been programmed and will appear in the display.
The Air Swinger will automatically return to the “READY TO PRINT”
cycle.
REMEMBER:
If a beep is heard at anytime during programming, you
have made an error. Please re-read the instructions and try again.
Key in second desired time (i.e. 010 seconds)
To accept time withought changing it, Press the “E” Key. The
Machine will turn to normal operating mode.
To enter time, key in 3 digits within a range of 001 to 999
seconds.
Press “E” Enter Key to
enter the second time
(press for 2 seconds)
The second time has now
been programmed.
NOTE:
Your Hotronix
®
Air Swinger will automatically return to normal operating mode.
Adjusting Dual Time
5.
PAGE 9
SET TIME: 008
SET TIME: 2 010
T = 360/360 t = 010
1 2 3
4 5 6
7 8 9
C 0 E #
0
F
0
C
1 2 3
4 5 6
7 8 9
C 0 E #
0
F
0
C
