6
Chapter 4
Installation and Start-up
Subject to technical changes
Rev. 1.01.08
4
Installation and Start-up
4.1
Scope of supply
4.2
Equipment implementation/Ordering designations
When ordering the controller it is important to specify what options are required (refer to ). The exact specification
can be read on the type plate on the cardboard box
,
the controller housing and the printed circuit board.
4.2.1 Type plate
The following information can be taken from the type plate:
The controller is packed in a robust cardboard box.
Check the packaging and then the temperature controller for identifiable
damage incurred during transit. If damage is identified
,
then please get
in touch with the transportation company.
In case of damage DO NOT put the controller into operation.
Two securing brackets (see figure) and the operating instructions are in-
cluded in the box.
Type plate on cardboard box
Type plate on controller housing
Type plate on printed circuit board
1
Ó
Type designation
2
Revision identification of the printed circuit boards
3
Revision identification of the controller software
4
Order number
5
Serial number
Summary of Contents for hotcontrol C248
Page 2: ......