Page 26
SOOTHING SEVEN
®
JET
The Soothing Seven
®
jet is another unique feature of Hot Spring spas. Its seven outlets are designed to massage the muscles in the upper back
and shoulders, gently and thoroughly. Turn the faceplate clockwise to increase the jet pressure and counterclockwise to decrease the jet pressure.
PRECISION
®
JETS
Precision
®
jets are located above Moto-Massage
®
jets and in groups of various sizes in the Landmark
®
, Grandee
®
, Vanguard
™
, Sovereign
®
Limited
Edition, Sovereign
®
, and Prodigy
®
models. They are designed to perform a soft, soothing massage on your back and shoulders. Adjust the pressure
of the Precision
®
jets using the Comfort Control
®
lever with the dark teal, forest green, or blue dot (located closest to the Precision
®
jets).
Refer to the drawings on the following pages to familiarize yourself with the SmartJet
®
system menus for your spa. Please note that the SmartJet
®
lever side of the spa is always considered the front when referring to the locations of the different types of jets and jet systems.
The clock
positions are correct when facing the spa, standing at the SmartJet
®
lever.
JETSTREAM
®
JET
The JetStream
®
jet is a large orifice hydromassage jet designed to put maximum massaging action on a specific area of the body. It is located in the
lower part of the spa to afford optimal access for the massaging of feet, legs, hips, and lower back. The intensity of the JetStream
®
jets can be
altered (except the ones found in the FootWell
®
system) using only the Comfort Control
®
lever with the steel blue or dark grey lever. JetStream
®
jets located in the FootWell are not adjustable.
DREAMJET
®
MASSAGE PILLOW
Unique to the Landmark Spa, the DreamJet
®
massage pillow provides an adjustable dry neck massage. The strength of the massage is adjusted
by turning the left Comfort Control
®
lever (located closest to the DreamJet
®
massage pillow). Increasing the air volume will increase the intensity of
the massage, while decreasing the air volume will lessen the intensity, providing soothing relaxation.
OPERATIONAL NOTE:
The height of the DreamJet
®
massage pillow is adjustable, this provides the same comfort for different users. To adjust
the height of the pillow, simply push in on the button directly below the pillow to raise or lower the entire assembly (see illustration below).
DOS AND DON’TS
• DO change the height of the DreamJet
®
massage pillow only when the jets are off.
• DO push the faceplate in for height adjustment, don’t pull up or push down on the button.
• DON’T push or pull on the black membrane to raise or lower the DreamJet
®
massage pillow.
• DON’T run the spa if the black membrane is damaged or removed.
• DON’T sit on the DreamJet
®
massage pillow.
To adjust height,
push in and hold the button
While button is depressed, raise or
lower entire assembly at the
locations shown
DO NOT adjust the assembly by
grabbing the black membrane
Operating Instructions