LOCKING FEATURES
The two locking features, SPA LOCK and TEMPERATURE LOCK, are enabled from the control panel by pressing the SET button until the TOOLS
menu is displayed. Then press the TEMP
button to enter the TOOLS submenus. Use the SET
button to scroll through the submenus to get
to the locking features. Once enabled, a lock will remain active until the specific button combination is applied to disable the lock. Even if power is
disconnected from the spa and soon thereafter reapplied (such as in a power outage) the lock will remain in place.
TEMPERATURE LOCK
The TEMPERATURE LOCK feature deactivates the temperature control function of the control panel. The jets and the light
functions will operate normally. TEMPERATURE LOCK is most often used by people who do not want others to tamper with
or change the set temperature of the spa water. TEMPERATURE LOCK is a submenu of the TOOLS menu
To activate the TEMPERATURE LOCK, press the SET button in the TOOLS submenu until the TLOK- symbol is
displayed on the screen. Press the TEMP
button to activate the TEMPERATURE LOCK feature (TLOK+).
When the TEMPERATURE LOCK is activated, the JETS, LIGHT and any other features your spa may have will operate normally, and the
temperature setting can be viewed but can NOT be changed. If a temperature button is pressed, TLOK will display for several seconds, then turns off.
To deactivate the TEMPERATURE LOCK, press the SET button in the TOOLS submenu until the TLOK+ symbol is displayed on the screen. Press
the TEMP
button to deactivate the TEMPERATURE LOCK feature.
SPA LOCK
The SPA LOCK feature deactivates all of the functions of the control panel. It is generally used to prevent unwanted
use of the spa. The SPA LOCK menu is a submenu of the TOOLS menu.
To activate the SPA LOCK, press the SET button in the TOOLS submenu until SLOK- is displayed on the screen.
Press the TEMP
button to activate the SPA LOCK feature.
When the SPA LOCK is activated, the buttons for the jets, temperature control, light, and any other features your spa may have are deactivated. If Jets,
Light button, or Temp
or TEMP
button is pressed, the SLOK will display for several seconds, then turns off.
To deactivate the SPA LOCK, press the SET button in the TOOLS submenu until the SLOK+ symbol is displayed on the screen. Press the
TEMP
button to deactivate the SPA LOCK feature.
LOCK OVERRIDE
The Lock Override feature is for spa users who normally keep the set temperature locked. Should the user wish to lock all spa controls temporarily,
the spa lock can be applied over an already-applied temperature lock. Then, when the spa lock is removed, the temperature lock will remain on to
prevent unwanted tampering with the set temperature.
SUMMER MODE (OPTIONAL ON SX & TX MODELS ONLY)
If your spa is equipped with a circulation pump it will also have a Summer Mode timer. The Summer Mode timer can be activated during extremely
hot summer months if it becomes difficult to maintain water temperatures low enough for comfort. Upon switching to the ON mode, the circulation
pump (which can add heat to the water through normal operation) and heater will immediately shut down for the next eight hours. Additionally, the
summer mode display on the control panel will activate and remain active for as long as the summer mode is on. Following this eight hour period,
the circulation pump and heater will automatically re-start and will operate normally for the next sixteen hours. The circulation pump and heater
will continue to turn off for an eight hour period every day that the timer remains in the ON position. In this way, the amount of heat transferred to
the spa water will be minimized. When the outside temperatures begin to cool, the Summer Mode timer should be turned to the OFF position (the
summer mode icon on the main display will shut off). This is the efficient 24 hour circulation mode that keeps the heater operation and operating
costs to a minimum during colder/heavier usage months.
NOTE:
Whenever power is disconnected and then reconnected to the spa, the Summer Mode timer will reset starting with the 8-hour shutdown
mode. If a different 8-hour shut down time is desired, deactivate the Summer timer Mode, then reactivate at the beginning of the desired eight-hour
shut down time.
IMPORTANT:
The Summer Mode will not lower the spa’s water temperature below the ambient air temperature.
To activate the Summer Mode, simply follow these steps:
1. Set the temperature control to 80°F (26°C) if desired to prevent the heater from turning on during cooler times.
2. On the control panel press the SET button until the TOOLS menu is displayed. Then press the TEMP
button
to enter the TOOLS submenus. Press the SET button until SUMMR is displayed on the screen. Press the TEMP
button to activate the Summer Timer mode. The Moon & Stars icon is on when in Summer Timer Mode.
The Summer Mode must be deactivated when cooler temperatures return. To do this, simply follow step 3.
3. To shut the Summer Mode off, press the SET button until the TOOLS menu is displayed. Then press the TEMP
button to enter the TOOLS
submenus. Press the SET button until SUMMR is displayed on the screen. Press the TEMP
button to deactivate.
Page 24
Operating Instructions
