ENG
18
body with a
• damp cloth.
• Wash all removable parts with warm water and a neutral detergent, then
rinse and dry.
• Before using the unit for the first time, make sure that voltage in your mains
corresponds
• to the voltage specified on the unit.
Assembling appliance
• Press the head fasten button (3) and insert the removable head (7) into
the hole (4) on the body as shown in Fig.1. (note the tilt of the work head
according to the pointer at the top).
• Then turn the work head counterclockwise until it locks in place (Fig. 2).
• Insert the screw (8) into the removable head (7) and turn it until the screw is
fully secured in the working head (Fig.3).
