Functionality (Clusters)
(input 0x0000) Basic
(input 0x0006) On/Off
(input 0x0702) Consumption metering
(input 0x0003) Identify
(input 0x0004) Groups
(input 0x0005) Scenes
Control
By pressing the button once, the power supply to the consumer is toggled.
If the device is connected to a ZigBee network, use the capabilities of the corresponding
system to monitor and control the device remotely.
If the plug is bound with another ZigBee device (eg Button) follow its instructions. Most
often, the command is sent by a single press.
Indicators
The device has two light indicators:
Orange
– to indicate the line is powered.
Blue
– for backlight (line off) and configuration status indication:
FAST blinking (4 times/second) – when executing a command.
SLOW blinking (once/second) – when entering a command or returning
the result of a command.
In case of an invalid command or configuration error, the blue LED will blink
SLOWLY as follows:
1 – wrong command.
2 – the device is not part of a ZigBee network. The command could not be
executed.
3 – the device is locked. The configuration command could not be
executed.
4 – the device is part of a ZigBee network. The command could not be
executed.
5 – wrong PIN/PUK code. The command will not be executed.
