27536-0-0610
Page 19
6
9
Use a saw to cut the holes out of the wall and discard the
inner circle debris. The wall is now prepared for the installation
of the unit.
Locate the studs in the wall and use at least four (4) wood screws
to attach the wall mounting plate to the wall.
If installing onto drywall (not into a stud), anchors must be
used.
8
Push on bottom of casing door to open it. Pivot and remove cas-
ing door. Remove two screws from the back inside of the unit
and detach the wall mounting plate from outside back of the
unit.
(2) SCREWS
interiOr inStallatiOn
7
Before installing unit, remove wall mounting plate from back of unit.