13
TROUBLESHOOTING
Problem
Lights do not turn on
Lights flickering on/off
Lights do not turn off
Sensor coming on
during daytime
Recommended Action
1) Check light switch is on
2) Check wiring
3) Check sensor is level and pointed at the area
you desire, and movement is not directly
towards the sensor but across the lens. Check
sensor is mounted at the recommended
height.
1) Check position of time adjustment at bottom
of sensor. Setting the arrow at "-" gives 5
seconds and setting arrow fully at "+" gives 5
minutes. Adjust to desired time.
1) Turn time adjustment closer to "-" negative
sign at the bottom
2) Turn light switch off and then back on after 20
seconds, you are now in sensor mode
3) Make sure the sensor is not aimed at
something that would cause a temperature
change or towards objects which may move.
1) Turn LUX adjustment at the bottom of the
sensor to moon setting
M
surfaces can accumulate dust and
debris can directly influence the
A regular cleaning maintenance
be run on a 6 monthly cycle.
e program it is important to check
ny loose screws are tightened. Any
d be replaced during the regular 6
ant to not use corrosive or volatile
ile liquids may cause a chemical
mance. It is recommended to use a
10 & 20W sensor lights instructions_A6_Layout 1 13/10/2016 11:06 am Page 13
