10 |
P a g e
HOUSTON MEDIA SYSTEMS 5713 Second Street | Katy, TX 77493 281-464-0101
H
M
S90 Installation
Roof Mounting and Sealing
Materials Provided
1.
Gen5
Antenna
2.
Mounted 3 wire connector box
3.
Antenna control unit with power supply
4.
Pre-terminated control cable for controller
5.
Coax cables
Materials Not Provided
1.
9 V DC Battery
2.
7
/16” wrench
3.
¼ inch nut driver
4.
Small diameter drill bit long enough to go through the roof of your coach
5.
Small standard (jewelers) screwdriver
6.
1” hole saw
7.
1 power strip or uninterruptible power supply suitable for your application
8.
20 Mounting screws
#14 1” self
-tapping screws or #12 pan head screws (stainless steel
recommended for strength and to limit corrosion)
Caution:
Make sure the screws will not be too long and penetrate the interior structure of
the vehicle. Screws too short may not be adequate to hold the antenna on to the roof.
9.
Appropriate bit for the mounting screws selected
10.
1-2 tubes of DICOR self-leveling sealer (available at most RV dealerships)
11.
1 tube of dielectric compound (Boss Products Accumetric, LLC
12.
1 tube clear silicone #315 (Boss Products
13.
Approximately 20-25 black wire ties
14.
20 black wire clips PN GCD12BLK or cable/tubing clamps SKU: STC-50-SS @
Caution: Do NOT use white clips or wire ties as they become brittle when exposed to UV
light
15.
Split loom cable wrap
Identify the install location and verify the area is clean and clear of debris.
