Houston Radar PNL10 User Manual
Page 21 of 32
brightness control work as normal. This can be a useful tool to test the sign on a low
traffic road or inside an office or trade show floor.
In demo mode, the radar will
not
pickup and display actual traffic speeds
.
A power cycle is required for the change to take affect after going from Normal to
Demo mode or vice-a-versa. If you change modes and save the configuration to
the radar, the software will prompt you for a reboot. This allows you to change
the mode from the PC without opening the PNL10 box and physically power
cycling the unit.
Write the Configuration to the PNL10:
Step 8
: Write the Configuration to the PNL10 by clicking on the “Write To Radar”
button. You must click this button and be presented with the” Configuration Saved”
message before your changes are saved to the connected PNL10.
Step 8
