To fold your Journey, push the folding hinge release button and pull the
folding hinge down. Push the steering column down to the rear fender. Find
the folding clip on the left handlebar and align the opening with the folding
hook protruding from the rear fender to lock them together. Your Journey
should be locked in a folded position.
To unfold your Journey, pull on the bottom edge of the folding clip to unlock
the steering column. Raise the steering column until it is pointing straight
up. Pull the folding hinge up and press it against the steering column to
ensure it is securely locked.
To activate high speed mode, ensure the Journey is powered on and not in
motion. Press the power button once. The high speed mode indicator
should light up on your display to indicate it is activated.
To activate crusie control, quickly press the throttle down two times
while riding at a constant speed above 3 mph. You will hear a beep
and the cruise control indicator will light up on the LCD display,
indicating that it is activated. Press the throttle down once or squeeze
the brake handle to cancel cruise
control.
For safety reasons, the Journey will not accelerate unless it is already moving
at least 1.8 mph (3 km/h). You must push off the ground with your foot to get
the Journey moving, then press the throttle to ride it.
KICK TO START
FOLDING & UNFOLDING
HIGH SPEED MODE
CRUISE CONTROL
FOLDING
HINGE
RAISE O
R L
OW
ER
RELEASE FOLDING HINGE TO
FOLD STEERING COLUMN
19
