LCD ZOOM MICROSCOPE
and add repairing work for serviceman;
In case of replacing accessory, confirm with serviceman the new accessory is the one
specified by manufacturer or its function is equal to the old one; improper use of
accessory may cause fire, electric shock or damage to the monitor;
Mount the monitor on the wall or ceiling with the installing method recommended by
manufacturer;
Unplug the equipment while cleaning it ; clean the monitor with slightly wet cloth and don’t
use any liquid or spraying cleaner;
Remove AC plug from the outlet in case of no use of the equipment for a long time;
Don’t put the equipment on unstable handcart, rack, tripod or table;
The LCD is made of sensitized material so don’t hit the LCD with any article; if the
equipment falls off from higher position or suffers hit, the LCD may go into pieces; stop
using the monitor immediately;
Don’t expose the equipment to sunlight or place it near hear source such as radiator,
heating device, stove and other exothermic articles;
The interval between turning on and turning off the equipment shall not be less than 2
seconds.
The distributor information
INSTRUCTION MANUAL
12
