LCD ZOOM MICROSCOPE
5.2.2. Move the object to be inspected to the laser point and then turn off laser pointer.
On the 2D position
On the 3D position
Push or Pull to changing the
view angle attachment
position.
5.3. Rotate 3D attachment to view the object to be
inspected.
5.3.1 Push the reflector attachment to change the view in 2D
or 3D.
Note: While change to 3D view from 2D, re-adjust to focus
again.
5.4. Lighting Adjustment
：
Keep pressing the light button till appropriate lighting
5.5
．
Auto White Balance: One-press of W.B key
5.6 Video Out:
5.6.1 The video out connecter is for connect with the other video monitor when needed. Or
you can connect with the computer with a frame grabber when needed.
5.6.2 Note: Push BNC connector and rotate anticlockwise to disconnect the cable.
INSTRUCTION MANUAL
6
