20_
Built-In
Appliances
Special programmes
For speci
fi
c applications, select any of the following
programmes:
• Rinse
This programme is used when you want to rinse or
starch separately.
• Spin + Drain
This programme spins with maximum possible rpm
in the default setting after the water drains from the
machine.
Use a lower spin speed for delicate laundry.
Temperature selection
Whenever a new programme is selected, the
temperature anticipated for that programme
appears on the temperature indicator .
To change the temperature, press the temperature
button. Temperature decreases in 10° increments.
Cold selection is shown with “ ” symbol.
When the “Temperature” button is pressed after
Cold is selected, the maximum temperature of the
programme you have selected will be displayed.
To decrease the temperature, press the
“Temperature” button again
Temp
Load
90 ºc
Normally soiled, white cottons
and linens. (Ex.: coffee table
covers, tablecloths, towels, bed
sheets)
60 ºc
Normally soiled, fade proof
coloured linens, cottons or
synthetic clothes (Ex.: shirts,
nightgowns, pyjamas) and
lightly soiled white linen clothes
(Ex.: underwear)
40 ºc
30 ºc
Cold
Blended clothes including
synthetics and woollens as well
as dedicates.
Economy symbol
Shows energy saving programmes and temperature
selections.
As “Intensive” and “Hygiene” programmes are long
programmes with higher temperature selections
to ensure hygiene, “ ” Economy Symbol will not
light up.
Spin speed selection
Whenever a new programme is selected, the
maximum spin speed of the selected programme is
displayed on the spin speed indicator.
To decrease the spin speed, press the “Spin”
button. Spin speed decreases gradually. Then, rinse
hold and no spin options are shown respectively.
Rinse hold is shown with “
” and no spin is
shown with symbols “
“.
F2
F4
F1
F3
If you are not going to unload your clothes
immediately after the cycle, you may use rinse hold
function in order to prevent your clothes becoming
creased when there is no water in the machine.
With this function, your laundry is kept in the
fi
nal
rinsing water. If you want to spin your laundry after
the rinse hold function:
•
Adjust the spin speed.
•
Press “Start/Pause/Cancel” button.
Programme resumes. Your machine drains the
water and spins your laundry.
You can use no spin function in order to drain
the water without spinning at the end of the
programme.
Selecting a Programme & Operating Your Machine
