22_
Built-In
Appliances
Auxiliary functions
Auxiliary Function Selection Buttons
a
b
c
d
F2
•
Depending on the programme, you can select
the desired auxiliary function by pressing the
buttons
a, b, c,d.
•
Select the required auxiliary functions before
starting the programme.
•
Some combinations cannot be selected
together. Eg.: Pre-wash and Quick Wash.
•
Symbol of the selected auxiliary function will
light up.
Auxiliary function selection
If an auxiliary function that should not be selected
together with a previously selected function is
chosen, the
fi
rst selected function will be cancelled
and the last auxiliary function selection will remain
active.
Eg. If you want to select pre-wash
fi
rst and then
quick wash, pre-wash will be cancelled and quick
wash will remain active.
Auxiliary function that is not compatible with the
programme cannot be selected. (see, “Programme
Selection Table”)
• Prewash
When you select this function
(a)
, the display will
indicate
“F1”
symbol.
•
A pre-wash is only worthwhile for heavily soiled
laundry. Without pre-wash you save energy,
water, detergent and time.
•
Pre-wash without detergent is recommended
for lace and curtains.
• Quicker Wash
With this function
(b),
the wash time is shortened.
“F2”
symbol lights up on the display.
Use this function for smaller amounts or slightly
soiled laundry.
• Extra Rinse
When this function
(c)
is selected, washing and
rinsing is performed with plenty of water.
“F3”
symbol lights up on the display.
• Anti-Crease
With this function
(d),
drum movement will be
lessened to prevent creasing and spinning speed
is limited. In addition, washing is carried out at a
higher water level.
“F4”
symbol lights up on the
display.
•
Use this function for delicate laundry that
crease easily.
Whenever you select this auxiliary function,
load your machine with half of the maximum
laundry speci
fi
ed in the programme table.
• Rinse Hold
If you are not going to unload your clothes
immediately after the programme completes, you
may use rinse hold function and keep your laundry
in the
fi
nal rinsing water in order to prevent them
creasing when there is no water in the machine.
Press “Start/Pause” button after this process
if you want to drain the water without spinning.
Programme resumes. The machine drains the water
and programme completes.
If you want to spin your laundry that you left in
water:
•
Adjust the spin speed.
•
Press Start/Pause button
Programme resumes. Your machine drains the
water, spins the laundry and programme completes.
Selecting a Programme & Operating Your Machine
