24_
Built-In
Appliances
Selecting a Programme & Operating Your Machine
Pre-wash
When “prewash” auxiliary function is selected,
prewash symbol will light up to indicate the
beginning of prewash step.
Main wash
Main wash symbol will light up to indicate that the
main wash cycle has started.
Rinse
Rinse symbol lights up at the beginning of the rinse
step.
Softener
Softener symbol lights up at the beginning of
softener step.
Spin
Spin symbol will light up at the beginning of the
fi
nal spin, during “Spin” and “Pump” special
programmes.
If the machine is not spinning, the programme
may be in rinse hold mode or the automatic spin
correction system has been activated due to an
excessive unbalanced distribution of laundry in the
machine.
Changing the selections after the
programme has started
The selected spin speed and programme
temperature fade out. An empty frame appears.
When the “Programme selection” button is brought
to the appropriate position, rpm and temperature
data reappear.
Switching the machine to
standby mode
The machine is switched to standby mode
by pressing “Start/Pause/Cancel” button
momentarily. The Standby symbol which indicates
the machine is in standby mode lights up and
the start symbol that shows the programme has
started and is still continuing fades out.
F2
F4
F1
F3
Selecting or cancelling an auxiliary function in
pause mode
Auxiliary functions can be cancelled or selected
in accordance with the step the programme is at.
Adding/removing laundry in pause mode
The door can be opened if the water level is
suitable. The door locked symbol will light up until
the door is suitable for opening. This symbol will
fade out as soon as the door is able to opened.
Door lock
The Door Locked Symbol lights up when the door
is locked. This symbol will
fl
ash until the door is
allowed to open. Do not force the door at this
stage. This symbol will fade out as soon as the
door is able to be to opened.