12
6.Connect power with MDVR
Use DC12V, 3A(at least) or
higher(5A is better)
power adapter in office test.
As for vehicle installation, please connect ACC cable with ignition on vehicle.
7. Connect TFT monitor
Connect a TFT monitor with AVOUT port on the rear panel of MDVR.
Attention
：
The MDVR will provide power and image to TFT screen by Avout port
, so don’t connect
any external power for the TFT screen, or else, it will destroy the MDVR.
7. System diagram
This product is suitable for video monitoring or remote monitoring and applicable for general or special
vehicles. It mainly uses the special designed vehicle camera to acquire the front video signal, then
transmits the signal via a special video cable to the MDVR mainframe for video compression and image
processing and finally stored in the HDD.
It can also locate where the vehicle is in real time via GPS module, and then upload the location
information to the remote server via 3G/4G module. You can download video files from the remote client
to realize real-time remote monitoring of the vehicle. The following shows the actual application model
of this product that may be different depending on vehicle type and peripherals.
