22
9.2.2.5. Config
Parameters import:
Import configuration information in the USB driver to the current device.
Parameters Export:
Export all the configuration information of the current device to the USB flash
driver.If there is no USB flash driver, it will saved in the existed HDD/SD card.
Tips
:
If you had set the whole parameters in one device already, you can export it first, and then import to
other devices by this function. After the import, it will reboot automatically.
Save User Setting:
Save all configuration information for the current user, it will store this information
in the SD/HDD.
Factory settings:
Restore some device parameters to factory default, such as Alarm, Record. It will
not change the Register and Network setting.
Back to User settings:
Restore all device parameter setting to saved user’s setting
9.2.2.6. Format
Press the arrow keys to select
DISK1 / DISK2 / USB
(if you had plugged the USB driver).
It will display the whole available disks. Size/Std size/Block setting.
STD size
: The area for saving Alarm pictures, debug Logs, system file, Alarm videos. This area is which
