37
Enable
：
Press
【
Enter
】
select: ON/MOVE/OCC.
Limit:
Set the threshold of video area/detection area percentage . Suggest 45.
Sense:
Sensitivity , it decides the detection sensitivity level .Press
【
Enter
】
to select: 1-8.
1 is the highest level
. Suggest to use 3.
Record:
Turn on/off recording function.Press
【
Enter
】
to select: On / Off.
Alarm linkage:
Press
【
Enter
】
to select:
OFF/Output 1 / Output 2 / Buzzer/snap-up
.
Delay:
Linkage’s duration time. Press number keys to set.
Attention
:
Regarding the occlusion function. For 8-channel device, we suggest choose 4 channels at most.
For 4-channel device, we suggest choose 2 channels at most.
9.2.5.5. Voltage alarm
If the operation voltage is low, it will trigger the alarm. The system can work at 8-36V (The lower voltage,
the more current demanding), it’s better work at 12/24V. So you can set a
Limit
value first.
Enable
：
Press
【
Enter
】
to select: ON/OFF.
Limit:
Set the threshold of voltage level .Press the number keys to enter.
Wait:
The waiting time in case of system mistaken detection . Press the number keys to enter.
Alarm linkage:
Press
【
Enter
】
key to select:
OFF / Output 1 / Output 2/Buzzer
.
Delay
:Linkage’s duration time. Press number keys to set.
9.2.5.6. Serial
