3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 34
), and then remove the following components:
●
WLAN module (see
WLAN module on page 42
)
●
Hard drive (see
Hard drive on page 47
)
●
Keyboard (see
Keyboard on page 53
)
●
Top cover (see
Top cover on page 57
)
●
Speakers (see
Speakers on page 65
)
●
USB board (see
USB board on page 67
)
●
Power connector cable (see
Power connector cable on page 69
)
●
Display assembly (see
Display assembly on page 71
)
●
System board (see
System board on page 81
)
●
Fan/heat sink assembly (see
Fan/heat sink assembly on page 87
)
To remove the processor:
1.
Use a flat-bladed screw driver
(1)
to turn the processor locking screw one-half turn
counterclockwise
(2)
until you hear a click.
94
Chapter 4 Removal and replacement procedures
Summary of Contents for 2000
