Optical drive cable
Description
Spare part number
Optical drive cable (includes cable bracket)
685084-001
Before removing the optical drive cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 34
), and then remove the following components:
●
WLAN module (see
WLAN module on page 42
)
●
Hard drive (see
Hard drive on page 47
)
●
Keyboard (see
Keyboard on page 53
)
●
Top cover (see
Top cover on page 57
)
●
Speakers (see
Speakers on page 65
)
●
USB board (see
USB board on page 67
)
●
Power connector cable (see
Power connector cable on page 69
)
●
Display assembly (see
Display assembly on page 71
)
●
System board (see
System board on page 81
)
Remove the optical drive cable:
1.
Remove the Phillips PM2.0×3.0 screw
(1)
that secures the optical drive cable and cable bracket
to the base enclosure.
2.
Remove the cable bracket
(2)
and cable
(3)
.
Component replacement procedures
85
Summary of Contents for 2000
