HP Compaq Compaq Presario,Presario V3000T Maintenance And Service Manual Download | Manualshive

Page: 264 / 298

background image

Backup and Recovery in Windows Vista

Maintenance and Service Guide

C–7

Performing a Recovery

Recovery Manager software allows you to repair or restore the
system if you experience system failure or instability. Recovery
Manager works from recovery discs that you create or from a
dedicated recovery partition on the hard drive.

✎

Windows has its own built-in repair features, such as System
Restore and driver rollback capabilities. If you have not already
tried these features, try them before using Recovery Manager.

✎

Recovery Manager only recovers software that was preinstalled
at the factory. Software not provided with this computer must
be reinstalled from the disc provided by the manufacturer or
downloaded from the manufacturer's Web site.

Recovering from the Recovery Discs

To restore the system from the recovery discs:

1. Back up all personal files.

2. Insert the first recovery disc into the optical drive and restart

the computer.

3. Follow the on-screen instructions.

Recovering from the Partition on the Hard

Drive

You can perform a recovery from the partition on the hard drive
from either the Start button or

f11

.

To restore the system from the partition, follow these steps:

1. Access Recovery Manager in either of the following ways:

❏

Select

Start > All Programs > Recovery Manager >

Recovery Manager

.

«
...
262
263
264
265
266
...
»

Summary of Contents for Compaq Presario,Presario V3000T











































































































































































































































































































Reviews:

No comments

Related manuals for Compaq Presario,Presario V3000T

Brand: OLPC Pages: 37

Brand: Olivetti Pages: 52

Swift 3 SF314-59

Brand: Acer Pages: 85

PREDATOR TRITON 300 SE

Brand: Acer Pages: 97

Brand: Acer Pages: 78

Aspire 5332 Series

Brand: Acer Pages: 11

ASPIRE ASPIRE X1700

Brand: Acer Pages: 99

Brand: Acer Pages: 13

Brand: Lenovo Pages: 5

Brand: Lenovo Pages: 4

Brand: Lenovo Pages: 103

Brand: Lenovo Pages: 89

IdeaPad 2 in 1-14

Brand: Lenovo Pages: 88

Brand: Lenovo Pages: 193

Brand: Lenovo Pages: 146

646066U - ThinkPad T61 6460

Brand: Lenovo Pages: 256

Brand: Lenovo Pages: 221

646001U - ThinkPad T61 6460

Brand: Lenovo Pages: 178

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands