11
GB
Lift one side of the roof structure and insert
the legs. Note! Ensure the four legs (3) are
inserted into the corners. Pull the roof (11)
over its supporting structure and tie it
securely in place.
Lift the other side of the roof structure up
and insert the remaining legs.
Hang the side panels.
The pavilion can be tied down with guy
ropes or some other form of anchoring if
required.
Cleaning and maintenance
Roof and side panels can be washed with
soapy water. Mould and discolouring can be
removed with a mild bleach solution. Follow
the manufacturer’s instructions and always
try the solution on a place that will not be
visible to ensure it does not miscolour.
Note! Do not pack the pavilion away when
wet. Let it dry completely before folding and
packing it.
Delivery
The tent is delivered in 6 cartons:
Carton no. 1: 10pcs pipe 1, 2pcs pipe 2,
3pcs pipe 3
Carton no. 2: 6pcs pipe 2, 3pcs pipe 3
Carton no. 3: 6pcs pipe 2, 3pcs pipe 4
Carton no. 4: 8pcs pipe 2, 1pcs pipe 4
Carton no. 5: Connector 5, 6, 7, 8, 9 and all
accessories
Carton no. 6: Roof, side panels and end
panels
Service centre
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• Open weekdays from 8.00 to 16.00
(Fridays until 15.30)
• E-mail: service@hpschou.com
Manufactured in P.R.C.
Manufacturer:
HP Schou A/S
Nordager 31
DK-6000 Kolding
© 2018 HP Schou A/S
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from HP
Schou A/S.
