Memory module
Description
Spare part number
2048-MB memory module (667-MHz, DDR2)
589666-001
1024-MB memory module (667-MHz, DDR2)
589665-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 38
).
5.
Remove the service cover (see
Service cover on page 40
).
Remove the memory module:
1.
Pull away the retention clips
(1)
on each side of the memory module to release the memory
module. (The memory module tilts up.)
CAUTION:
To prevent damage to the memory module, hold it by the edges only. Do not touch
the components on the memory module.
2.
Grasp the edge of the memory module
(2)
, and then pull it out of the memory module slot.
NOTE:
Memory modules are designed with a notch
(3)
to prevent incorrect insertion into the
memory module slot.
Reverse this procedure to install the memory module.
Component replacement procedures
47
Summary of Contents for 1010nr - Mini - Atom 1.6 GHz
Page 1: ...HP Mini 2102 HP Mini 210 and Compaq Mini 210 Maintenance and Service Guide ...
Page 4: ...iv Safety warning notice ...
Page 8: ...Index 94 viii ...
Page 105: ......
