Speakers
Description
Spare part number
Speakers (include cables)
596153-001
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
Battery on page 38
).
5.
Remove the following components:
a.
Service cover (see
Service cover on page 40
).
b.
Keyboard (see
Keyboard on page 49
).
c.
Top cover (see
Top cover on page 52
).
Remove the speakers:
1.
Turn the top cover upside down, with the front toward you.
2.
Release the TouchPad cable
(1)
from the top cover. (The TouchPad cable is attached to the top
cover with double-sided adhesive).
3.
Release the speaker cable from the clips
(2)
built into the TouchPad bracket.
4.
Remove the two Phillips PM2.0×4.0 screws
(3)
that secure the speakers to the top cover.
5.
Remove the speakers
(4)
.
Reverse this procedure to install the speakers.
Component replacement procedures
55
Summary of Contents for 1010nr - Mini - Atom 1.6 GHz
Page 1: ...HP Mini 2102 HP Mini 210 and Compaq Mini 210 Maintenance and Service Guide ...
Page 4: ...iv Safety warning notice ...
Page 8: ...Index 94 viii ...
Page 105: ......
