Speakers
Description
Spare part number
Speakers (includes left and right speakers and cable)
747259-001
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 43
), and then remove the following components:
●
Service door (see
Service door on page 49
)
●
WLAN module (see
WLAN module on page 52
)
●
Top cover (see
Top cover/keyboard on page 55
)
●
USB board (see
USB board on page 69
)
●
Display assembly (see
Display assembly on page 61
)
●
System board (see
System board on page 73
)
To remove the speakers:
1.
Remove the four Phillips PM2.5×4.0 screws
(1)
that secure the speakers to the computer.
2.
Remove the speaker cable from the clips built into the computer chassis
(2)
.
3.
Remove the speakers
(3)
.
Reverse this procedure to install the speakers.
Component replacement procedures
89
Summary of Contents for 14 TouchSmart
