Heat sink
Description
Spare part number
Heat sink for use in models with 5th generation Intel processors and discrete graphics memory (includes
replacement thermal material)
807524-001
Heat sink for use in models with 5th generation Intel processors and UMA graphics memory (includes
replacement thermal material)
807523-001
Heat sink for use in models with 6th generation Intel processors and discrete graphics memory (includes
replacement thermal material)
828732-001
Heat sink for use in models with 6th generation Intel processors and UMA graphics memory (includes
replacement thermal material)
828733-001
Heat sink for use in models with 7th generation Intel processors and discrete graphics memory (includes
replacement thermal material)
860899-001
Heat sink for use in models with 7th generation Intel processors and UMA graphics memory (includes
replacement thermal material)
860900-001
Before removing the heat sink, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the top cover (see
5.
Remove the system board (see
).
To remove the heat sink assembly:
1.
Position the system board upside down.
2.
If disassembling a model with discrete graphics, disconnect the fan cable from the system board (1).
3.
In the order indicated, loosen the six Phillips screws (2) – (7) that secure the heat sink to the system
board.
44
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts