Table 5-4
Memory module descriptions and part numbers (continued)
Description
Spare part number
Memory module, 8 GB (DDR4-3200)
L46598-001
Memory module, 4 GB (DDR4-3200)
L83673-001
Before removing the memory, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page 31
).
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
).
If you are replacing a memory module, remove the existing memory module:
▲
Spread the two retention clips outward (1) until the memory module tilts up at a 45° angle, and then
remove the module (2). Use the same procedure to remove all memory modules.
IMPORTANT:
To prevent damage to the memory module, hold the memory module by the edges only.
Do not touch the components on the memory module.
To protect a memory module after removal, place it in an electrostatic-safe container.
To install a memory module:
1.
Align the notched edge of the module with the tab in the slot (1), and then press the module into the slot
at an angle until it is seated (2).
36
Chapter 5 Removal and replacement procedures for authorized service provider parts
Summary of Contents for 16-b0 Series
Page 4: ...iv Safety warning notice ...
