WLAN module
To remove the WLAN module, use this procedure and illustration.
Table 5-9
WLAN module descriptions and part numbers
Description
Spare part number
Intel Wi-Fi 6 AX201-W + Bluetooth 5 (non-vPro)
L92724-006
Intel Wi-Fi 6 AX210 + Bluetooth 5.2 (non-vPro)
M27269-006
WLAN module protective shielding
M14330-001
IMPORTANT:
To prevent an unresponsive system, replace the wireless module only with a wireless module
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page 31
).
2.
Remove the bottom cover (see
3.
Remove the battery (see
).
4.
Remove the left solid-state drive (see
5.
Remove the heat sink (see
Remove the WLAN module:
1.
Remove the plastic antenna protector from the module (1).
2.
Carefully disconnect the antenna cables from the module (2).
42
Chapter 5 Removal and replacement procedures for authorized service provider parts
Summary of Contents for 16-b0 Series
Page 4: ...iv Safety warning notice ...
