background image

Operating the Monitor 

4. Select the following options to configure the HP Display 

LiteSaver features: 

Configure Options 

Function 

Enable Display LiteSaver 

Enables the HP Display LiteSaver 
functions; deselect to disable the HP 
Display LiteSaver. 

Display Off 

Sets the time when the monitor 
automatically turn off. This does not 
affect screen saver operation, which 
has priority over the HP Display 
LiteSaver. 

Display On 

Sets the time when the monitor 
automatically turns on. This does not 
affect screen saver operation, which 
has priority over the HP Display 
LiteSaver. 

Activity Extension 

Sets the time in minutes before the 
monitor turns off if there is any 
keyboard or mouse activity after the 
Display Off time is reached. If the 
keyboard or mouse is used, then HP 
Display LiteSaver waits until the set 
amount of time before turning the 
display off again. Set to 0 to 
disable. If disabled, the monitor will 
turn off as soon as the Display Off 
time is reached, regardless of 
keyboard or mouse activity. 

Show 1 minute Display Off Notice  Displays a popup message in the 

system tray 1 minute before the 
monitor is turned off by HP Display 
LiteSaver. 

Status 

Shows the time until the monitor is 
next due to be turned off by HP 
Display LiteSaver. 

User Guide 

4–13 

Summary of Contents for 17-inch L1706





























































Reviews: