ENWW
Using the Embedded Web Server 123
CAUTION
If you are using direct-mode printing over IPX/SPX
on a Microsoft network,
do not
disable IPX/SPX.
For a Novell NetWare network:
●
The embedded Web server may be used to select Queue Server
Mode parameters in a Novell Directory Services (NDS)
environment.
●
You cannot create the NDS print server, printer, and queue
objects using the embedded Web server. To create these objects,
use other available tools or utilities.
Table 4.5
IPX/SPX Settings (1 of 2)
Item
Description
IPX/SPX Enable
Enables or disables the IPX/SPX protocols on the HP Jetdirect
print server. If the checkbox is empty, IPX/SPX is disabled.
IPX/SPX Frame
Type
Specify the IPX/SPX frame type to be used by the HP Jetdirect
print server on your network. After a frame type has been
configured, all others will be counted and discarded.
●
AUTO (default) senses all frame types and configures the first
one detected.
●
EN_8023 limits the frame type to IPX over IEEE 802.3 frames.
●
EN_II limits the frame type to IPX over Ethernet frames.
●
EN_8022 limits the frame type to IPX over IEEE 802.2 with
IEEE 802.3 frames.
●
EN_SNAP limits the frame type to IPX over SNAP with
IEEE 802.3 frames.
●
TR_8022 limits the frame type to IPX over IEEE 802.2 LLC
with IEEE 802.5 frames.
●
TR_SNAP limits the frame type to IPX over SNAP with
IEEE 802.5 frames.
SAP Interval
Specifies the time interval (in seconds) that the HP Jetdirect
print server waits to send Service Advertising Protocol (SAP)
messages, which are broadcast to advertise its service
capabilities on a Novell NetWare network. To disable SAP
messages, use the value “0”.
