ENWW
Configuring for LPD Printing 166
2. If you have not previously installed the software:
■
Windows 2000—In the
Local Area Connection Properties
window, click
Install
. In the
Select Network Component Type
window, select
Protocol
and click
Add
to add the
Internet
Protocol (TCP/IP)
.
Follow the instructions on the screen.
■
NT 4.0—Click the
Add
button for each tab and install the
TCP/IP Protocol
and the
Microsoft TCP/IP Printing
service.
Follow the instructions on the screen.
When prompted, type the full path to the Windows NT
distribution files (you may need your Windows NT
workstation or server CD-ROM).
3. Enter TCP/IP configuration values for the computer:
■
Windows 2000—On the
General
tab in the
Local Area
Connection Properties
window, select
Internet Protocol
(TCP/IP)
and click
Properties
.
■
NT 4.0—You may be automatically prompted for TCP/IP
configuration values. If not, select the
Protocols
tab in the
Networks
window and select
TCP/IP Protocol
. Then click
Properties
.
If you are configuring a Windows server, type the IP address,
default gateway address, and subnet mask in the appropriate
spaces.
If you are configuring a client, check with your Network
Administrator to learn whether you should enable automatic
TCP/IP configuration or whether you should type a static IP
address, default gateway address, and subnet mask in the
appropriate spaces.
4. Click
OK
to exit.
5. If prompted, exit Windows and restart your computer for the
changes to take effect.