ENWW
Configuring for LPD Printing 170
Verifying the Configuration
From within Windows NT, print a file from any application. If the
file prints correctly, the configuration was successful.
If the print job is not successful, try printing directly from DOS
using the following syntax:
lpr -S<ipaddress> -P<queuename> filename
where
ipaddress
is the IP address of the print server,
queuename
is the name “raw” or “text” and
filename
is the file you wish to
print. If the file prints correctly, the configuration was successful.
If the file does not print, or prints incorrectly, see
Chapter 8
.
Printing from Windows Clients
If the LPD printer on the NT/2000 server is shared, Windows clients
can connect to the printer on the NT/2000 server using the Windows
Add Printer utility in the Printers folder.
LPD on Windows XP Systems
This section describes how to configure Windows XP networks to
use the HP Jetdirect LPD (Line Printer Daemon) services.
The process consists of two parts:
●
Adding Windows Optional Networking Components
●
Configuring a Network LPD Printer.
Adding Windows Optional Networking
Components
1. Click
Start
.
2. Click
Control Panel
.
3. Click
Network and Internet Connections
.
4. Click the
Network Connections
icon.
5. Select
Advanced
in the top menu bar. In the drop-down list,
select
Optional Networking Components
.
