ENWW
HP Software Solutions Summary 36
3. If AppleTalk is not active, an alert dialog box appears on your
screen. Select
OK
. The
Active
button turns on.
If your network is linked to other networks, the
AppleTalk
Zones
list dialog box appears in the Chooser.
4. If applicable, select the zone in the
AppleTalk Zones
scrolling
list where your printer is located.
5. Select the printer name you want to use from the list of printer
names in the upper-right area of the Chooser. If the printer's
name does not appear in the list, make sure the following tasks
have been performed:
■
the printer is turned on and is online.
■
the print server is connected to the printer and to the network.
■
the printer cable connections are secure.
A
READY
message should appear if the printer has a control panel
display. See
Chapter 8
for more information.
Note
If your printer is the only name listed in the
dialog box, you must still select it.
Your printer
remains selected until you select a different printer
with the Chooser.
6. Click
Setup
or
Create
in the Chooser; then, if prompted, select
the appropriate PostScript Printer Description file (PPD) for the
printer. For more information, see the online documentation.
7. Set
Background Printing
to
ON
or
OFF
.
If background printing is turned
OFF
when you send a print job
to the printer, status messages appear on your screen and you
have to wait until the messages clear before continuing your
work. If background printing is turned
ON
, the messages are
redirected to the PrintMonitor and you can continue working
while the printer is printing your job.
8. Exit the Chooser.
To display your user name on the network when you are printing
documents, go into the Control Panel on your Mac OS computer,
select
Sharing Setup
, then type your owner name.
