The following instructions and examples use HyperTerminal. For more information, see user
documentation for your emulator program.
a.
On the menu bar at the top of the HyperTerminal window, select
Transfer > Send File.
b.
Click
Browse
and navigate to the location of the
fi
rmware image obtained in
step 1
.
c.
Expand the
Protocol
drop-down box and select
1K XModem
.
d.
Click
Send.
A status window is displayed.
4.
Wait for the transfer process to complete.
NOTE:
This process may take up to 15 minutes. Do not interrupt this process.
5.
Wait for the controller to automatically restart.
maintenance and service guide
107
Summary of Contents for 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive
