4-14
Compaq Console Management Controller User Guide
Compaq Confidential – Need to Know Required
Writer:
Hilary Stead
Project:
Compaq Console Management Controller User Guide
Comments:
Part Number:
218258-002
File Name:
e-ch4 Software.doc
Last Saved On:
6/20/01 8:25 PM
To configure a CMC:
1.
Enter the name, physical location, and contact person for the CMC in
the
Device Setup
box.
2.
Select the appropriate display language and temperature unit of measure.
3.
Select the audible alarm
Off
radio button to permanently turn off the
audible alarm.
4.
Enable the
Press
to Silence Alarm
option to be able to silence
audible alarms from the front panel of the CMC.
5.
Enter a password specific to this CMC and enable or disable the
password functionality. The CMC password can be up to six characters
in length. Characters can only be capital letters or numbers.
NOTE:
If the password is enabled, the password is required to change the CMC
IP address and settings using the front panel controls or a terminal program.
6.
Edit the SNMP Read/Write Community strings if necessary.
CAUTION:
The SNMP Read/Write Community strings displayed on the
CMC
Properties
screen must match those on the CMC device. If you edit the strings
on this screen, be sure to make the same changes for the CMC device using a
terminal program as described in “Terminal Program Operation” in this chapter.
7.
After entering the CMC properties, click
Save
to save the changes or
click
Cancel
to cancel the changes.
8.
Click
Return
to view the
Device Home
screen for this CMC. The
Device Home
screen is discussed in detail later in this chapter.
To update the MIB, software, and firmware for the CMC, click
Update
.
