Display assembly
NOTE:
HP 210 G1 Notebook PC touchscreen, HP Pavilion TouchSmart 11 Notebook, HP Pavilion
11 Notebook touchscreen, and HP 215 G1 Notebook PC touchscreen computer models are spared at
the display assembly only. The display assemblies for the HP 210 G1 Notebook PC non-touchscreen,
HP 215 G1 Notebook PC non-touchscreen, and for HP Pavilion 11 Notebooks non-touchscreen
computer models are spared at the subcomponent-level only. For procedures to replace the display
assembly subcomponents for those non-touchscreen models, see
Display assembly subcomponents
on page 56
.
Description
Spare part number
11.6 inch (29.46 cm), SVA, LED touchscreen display assembly (includes webcam/microphone
module and wireless antenna cables), for use with HP 210 G1 touchscreen computer models
755303-001
11.6 inch (29.46 cm), SVA, LED touchscreen display assembly (includes webcam/microphone
module and wireless antenna cables), for use with HP Pavilion TouchSmart 11 Notebook, HP
Pavilion 11 Notebook touchscreen, or HP 215 G1 Notebook PC touchscreen computer models
753948-001
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 40
).
5.
Remove the service door (see
Service door on page 41
).
Remove the display assembly:
1.
Remove the rear rubber feet
(1)
.
The rear rubber feet are included in the Rubber Feet Kit, spare part number 730888-001.
2.
Remove the two Phillips PM2.2×5.5 screws
(2)
that secure the rear corner covers to
the computer.
Component replacement procedures
53
Summary of Contents for 210 G1
Page 4: ...iv Important Notice about Customer Self Repair Parts ...
Page 6: ...vi Safety warning notice ...
Page 10: ...x ...
