6.
Remove the system board
(3)
by sliding it up and to the left an angle.
Reverse this procedure to install the system board.
Heat sink
Description
Spare part number
HP 210 G1 Notebook PC
761242-001
HP Pavilion TouchSmart 11 Notebook, HP Pavilion 11 Notebook, or HP 215 G1 Notebook PC
computer models
730902-001
Before removing the heat sink, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 40
), and then remove the following components:
a.
Service door (see
Service door on page 41
)
b.
Hard drive (see
Hard drive on page 42
)
c.
Display assembly (see
Display assembly on page 53
)
d.
Bottom cover (see
Bottom cover on page 61
)
Component replacement procedures
73
Summary of Contents for 210 G1
Page 4: ...iv Important Notice about Customer Self Repair Parts ...
Page 6: ...vi Safety warning notice ...
Page 10: ...x ...
