Restoring factory settings in Computer Setup
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
Open Computer Setup by turning on or restarting the computer, and then pressing
f10
while the
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select
File
>
Restore defaults
, and then press
enter
.
3.
When the confirmation dialog box opens, press
f10
.
4.
To save your changes and exit Computer Setup, use the arrow keys to select
File
>
Save changes
and exit
. Then follow the on-screen instructions.
Your changes go into effect when the computer restarts.
NOTE:
Your password settings and security settings are not changed when you restore the factory
settings.
Using Computer Setup
93
