USB/card reader board
Table 6-9
Spare part description and number
Description
Spare part number
USB/card reader board
L20448-001
USB/card reader board cable
L20452-001
Before removing the USB/card reader board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 27
2.
Remove the optical drive (see
).
3.
Remove the bottom cover (see
4.
Remove the battery (see
).
Remove the USB/card reader board:
1.
Disconnect the cable from the ZIF connector on the USB board (1).
2.
Remove the Phillips M2.0 × 3.0 screw (2), and then remove the board from the computer (3).
Reverse this procedure to replace the USB/card reader board.
44
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Summary of Contents for 255 G7
