Antenna cable
The wireless antenna cable routes along the bottom of the computer chassis.
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 15
).
2.
Remove the access panel (
3.
Remove the optical drive (
).
4.
Remove the front bezel (
).
5.
Remove the fan duct (
).
6.
Remove the fan sink (
).
7.
Remove the drive cage (
8.
Remove the system board (
).
9.
Remove the cable from the three clips (1), (2), (3) built into base pan.
10.
Peel the antenna off the front of the computer.
To install the antenna cable, reverse the removal procedures.
Antenna cable
39