Chapter 1
1-21
HP 3000/9x9KS and HP 9000/K2x0/K4x0/Kx70/Kx80 Memory Upgrade Installation
Installation Procedure (HP 3000/9x9KS and HP 9000/K2x0/K4x0/Kx70/Kx80)
Example - Adding Memory to Two Extenders with Existing Memory
1. Remove the 128MB modules from the first extender, slots 2a/2b and 3a/3b. Remove the 32MB
module from the second extender, slots 4a/4b.
2. Add the removed modules to the new modules to form the following groups:
•
(2) 256MB modules (one pair of modules)
•
(1) 128MB module and (1) 64MB module (one pair of modules)
•
(2) 32MB modules (one pair of modules)
3. Install the largest-size (256MB) pair of modules in the lowest-numbered available slots (2a/2b and
3a/3b) on the extender with the most available slots. Since both extenders have the same available
slots, install them on the first extender.
4. Install the 128MB pair in slots 4a/4b and 5a/5b on the first extender.
5. Install the next-largest (mixed 128MB/64MB) pair of modules on slots 4a/4b and 5a/5b of the
second extender.
6. Install the remaining (32MB) pair of modules on the first extender in the remaining slots, 6a/6b and
7a/7b.
The final configuration is shown on the page following.
Current Memory:
5 256MB modules
4 128MB modules
1 32MB module
Memory to be added:
1 256MB module
1 128MB module
1 64MB module
1 32MB module
First Extender
Second Extender
B
E
F
O
R
E
Slot
Memory
Slot
Memory
0a/0b
256MB modules
0a/0b
256MB module
1a/1b
256MB module
1a/1b
256MB module
2a/2b
128MB module
2a/2b
128MB module
3a/3b
128MB module
3a/3b
128MB module
4a/4b
256MB module
4a/4b
32MB module
5a/5b - 7a/7b
empty
5a/5b - 7a/7b
empty
Shaded boxes indicate pairs of modules
Summary of Contents for 3000/939KS
Page 5: ...v ...
Page 8: ...vii Contents ...
Page 54: ...3 6 Chapter3 Power On and Verification Installation Verification ...