3-2
Chapter 3
Power On and Verification
Installation Verification
Installation Verification
To verify memory installation after a successful power on:
1. Reboot the system by typing "/etc/shutdown -r" at the operating system prompt.
2. Halt the boot process by pressing any key within the 10 second period provided by the system
software.
3. Type "ma" at the boot interface console prompt to get to the Main menu.
4. Type "in" at the Main menu prompt to get to the Information menu.
5. Type "me" at the Information menu prompt to verify that the amount of memory displayed conforms
to the amount of memory you have installed (see Figure 3-1).
Figure 3-1
Verifying Installation of System Memory Upgrade with the ME Command
If There Is a Problem Verifying the Installation
Incorrectly installed SIMMs or configuration violations may result in the following types of problems
when trying to verify the memory installation after power on:
•
Performance degradation.
•
Log warning and display hex code.
•
Boot command is disabled
•
Console warning messages.
Summary of Contents for 3000/939KS
Page 5: ...v ...
Page 8: ...vii Contents ...
Page 54: ...3 6 Chapter3 Power On and Verification Installation Verification ...