Removal and replacement procedures
Maintenance and Service Guide
4–27
Wireless button board
Before removing the wireless button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
“Battery” on page 4-7
).
5. Remove the accessory compartment cover (see
“WLAN module” on page 4-9
).
6. Remove the hard drive (see
“Hard drive” on page 4-18
).
7. Remove the keyboard (see
“Keyboard” on page 4-21
).
8. Remove the top cover (see
“Top cover” on page 4-24
).
Remove the wireless button board:
1. Turn the top cover upside down, with the front toward you.
2. Remove the Phillips PM2.0×4.0 screw
1
that secures the wireless button board to the top cover.
3. Remove the wireless button board
2
.
Reverse this procedure to install the wireless button board.
Description
Spare part number
Wireless button board (includes cable)
580060-001
Summary of Contents for 311-1025NR - Mini - Netbook
