background image

HP 10/100 3Com 3C905C-TX Network Interface Card Installation Guide

HP Software License Agreement

28 English

HP Software License Agreement

CAREFULLY READ THIS LICENSE AGREEMENT BEFORE PROCEEDING TO OPERATE THE 
HP ACCESSORY. RIGHTS IN THE SOFTWARE ARE OFFERED ONLY ON THE CONDITION 
THAT THE CUSTOMER AGREES TO ALL TERMS AND CONDITIONS OF THIS LICENSE 
AGREEMENT. PROCEEDING TO INSTALLING AND USING THE ACCESSORY INDICATES 
YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS. IF YOU DO NOT AGREE TO THE 
LICENSE AGREEMENT, YOU MUST NOW DESTROY ANY MASTER DISKETTES OR CD-ROMS, 
OR RETURN THE COMPLETE ACCESSORY AND SOFTWARE FOR A FULL REFUND.

UNLESS OTHERWISE STATED BELOW, THIS HP SOFTWARE PRODUCT LICENSE 
AGREEMENT SHALL GOVERN THE USE OF ALL SOFTWARE THAT IS PROVIDED TO YOU, 
THE CUSTOMER, AS PART OF THE HP ACCESSORY. IT SHALL SUPERSEDE ANY NON-HP 
SOFTWARE LICENSE TERMS THAT MAY BE FOUND ON-LINE, OR IN ANY DOCUMENTATION 
OR OTHER MATERIALS CONTAINED IN THE ACCESSORY PRODUCT PACKAGING.

Note: Operating System Software by Microsoft is licensed to you under the Microsoft End User 
License Agreement (EULA) contained in the Microsoft documentation.

The following License Terms govern the use of the software:

USE. Customer may use the software on any one computer. Customer may not network the 
software or otherwise use it on more than one computer. Customer may not reverse assemble or 
decompile the software unless authorized by law.

COPIES AND ADAPTATIONS. Customer may make copies or adaptations of the software (a) for 
archival purposes or (b) when copying or adaptation is an essential step in the use of the 
software with a computer so long as the copies and adaptations are used in no other manner.

OWNERSHIP. Customer agrees that he/she does not have any title or ownership of the software, 
other than ownership of the physical media. Customer acknowledges and agrees that the 
software is copyrighted and protected under the copyright laws. Customer acknowledges and 
agrees that the software may have been developed by a third party software supplier named in 
the copyright notices included with the software, who shall be authorized to hold the Customer 
responsible for any copyright infringement or violation of this Agreement.

TRANSFER OF RIGHTS IN SOFTWARE. Customer may transfer rights in the software to a third 
party only as part of the transfer of all rights and only if Customer obtains the prior agreement of 
the third party to be bound by the terms of this License Agreement. Upon such a transfer, 
Customer agrees that his/her rights in the software are terminated and that he/she will either 
destroy his/her copies and adaptations or deliver them to the third party.

SUBLICENSING AND DISTRIBUTION. Customer may not lease, sublicense the software or 
distribute copies or adaptations of the software to anyone in physical media or by 
telecommunication without the prior written consent of Hewlett-Packard.

TERMINATION. Hewlett-Packard may terminate this software license for failure to comply with 
any of these terms provided Hewlett-Packard has requested Customer to cure the failure and 
Customer has failed to do so within thirty (30) days of such notice.

UPDATES AND UPGRADES. Customer agrees that the software does not include updates and 
upgrades which may be available from Hewlett-Packard under a separate support agreement.

EXPORT CLAUSE. Customer agrees not to export or re-export the software or any copy or 
adaptation in violation of the U.S. Export Administration regulations or other applicable 
regulation.

U.S. GOVERNMENT RESTRICTED RIGHTS. Use, duplication, or disclosure by the U.S. 
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in 
Technical Data and Computer Software clause in DFARS 252.227-7013. Hewlett-Packard 
Company. 3000 Hanover Street, Palo Alto, CA 94304 U.S.A. Rights for non-DOD U.S. Government 
Departments and Agencies are as set forth in FAR 52.227-19(c)(1,2).

(9 Nov 1998)

3Com.book  Page 28  Tuesday, August 31, 1999  11:36 AM

Summary of Contents for 3C905C-TX































Reviews: